Cisco Antennas (53 products)
Multiband Swivel-Mount Dipole Omni-directional Antenna
The AIR-ANTM2050D-R antenna operates in the 2.4- and 5-GHz bands, and is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM2050D-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector. More Info
Aironet 7-dBi Diversity Patch Antenna
The antenna operates in the 5-GHz frequency range and is designed for use in both indoor and outdoor environments. More Info
Aironet 4-dBi Omnidirectional Antenna
The antenna is designed specifically for use with pre-802.11n and 802.11n 3-antenna access points. The antenna operates in the 5-GHz frequency range and is designed for use only in an indoor office environment. The antenna assembly consists of three radiating elements, each fed with its own coaxial cable. More Info
Single Unit Antenna Extension Base (15-ft cable included), Spare
The Cisco 3G-AE015-R single-port antenna base is designed for use with portable antennas operating at frequencies up to 6 GHz that connect to 3G wireless high-speed WAN interface cards (HWICs) using a threaded Neill-Concelman (TNC) male connector. This antenna base unit, ordered separately, has 15 feet of plenum LMR-195 cable and can be used with antenna Cisco 3G-ANTM1919D.The antenna base can be wall-mounted or placed on a rack or desktop, and has the following features:-Multiple band coverage supporting cellular backahaul installations and... More Info
2.4/5 GHz Directional Antenna, 13 dBi max.
Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum rated pigtail cables, 36 inches each and 6 RP-TNC connectors. Only certified for use with AP3502P access point. More Info
Omnidirectional, Dual-Band (2.4GHz: 2dBi/5GHz: 4dBi), 4x RP-TNC Male, Ceiling...
Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors. More Info
2.4/5 GHz Directional Antenna, 13 dBi max., 4 pcs
Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum rated pigtail cables, 36 inches each and 6 RP-TNC connectors. Only certified for use with AP3502P access point. More Info
Dual-Band Omnidirectional Antenna for Cisco Aironet 1600e, 2600e, and 3600e...
The next generation of Cisco® Aironet® 802.11naccess points – the Cisco Aironet 1600e, 2600e, 3600e Series and 1550 Series – requires the use of dual-band external antennas to make them fully functioning units. As these access points take greater advantage of the multiple-input multiple-output (MIMO) features supported under the 802.11n standard, the number of radio transceivers per frequency band has increased. Using dual-band antenna ports allows the access point to support these added transceivers while maintaining a reasonably low number... More Info
Dual-Band Omnidirectional Antenna, 2.4/5 GHz, 7 dBi max.
Dual-Band Omnidirectional Antenna for Cisco Aironet 1550 Series Access Points More Info
14 dBi Dual Port Patch Antenna, 5.15 - 5.9 GHz
5 GHz, 14 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30 inch cables terminated in right angle N-type connectors. More Info
Single-Band Directional Antenna, 2.4 GHz, 13 dBi, 2x N-Type
Single-Band Directional Antenna for Cisco Aironet 1550 Series Access Point More Info
8 dBi Dual Band Patch Antenna, 2.5/5 GHz
2.4 GHz, 8 dBi and 5 GHz 8 dBi dual band directional antenna with three N-type connectors. It can be used with the outdoor Access Points and has no cable attachments. More Info
Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular
The Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular antenna is designed to cover domestic LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and GSM900/GSM1800/UMTS/LTE2600 bands and is supported on the Cisco CGR 2010, 1240, and the 1120 routers. The Omnidirectional Outdoor Antenna is compatible with Cisco 2G, 3G, and 4G cellular devices that use a Type N connector and requires a mast-mounted outdoor antenna. More Info
Integrated 4G Low-profile Outdoor Saucer Antenna
- Applicable for both 3G and 4G solutions- Domestic LTE 700 band and global LTE 2600 band- Domestic cellular and global GSM- Weatherproof UV stable radome- Performance optimized- Excellent flame rating More Info
Short Dual-Band Omni Antenna, 2.4-2.5/5.15-5.925 GHz, 5 dBi, 50 g
Cisco Aironet Short Dual-Band Omni AntennaThe antenna operates over the 2.4 GHz and 5 GHz Wi-Fi bands and is designed for indoor use with the AP1600, AP2600, AP3600, and AP3700 series access points. The antenna utilizes an omnidirectional radiation pattern to achieve a broad coverage area.Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It does not articulate as the other dipole antennas. It can be used with the 1600/2600/3600/3700 APs More Info