Bridges & Repeaters (13 products)

10/100 VDSL2 Ethernet Extender Kit over Single Pair Wire – 1km

Extend your 10/100Mbps network by up to 1km over Ethernet or RJ11 phone lines.* Provides high speed Ethernet extension over copper telephone line or other existing two pair wiring enabling network connectivity to remote locations up to 1km away* Allows network connectivity in buildings made of stone/concrete, or heritage buildings where new Ethernet cabling or wireless are impossible* Simple Plug and play installation with no software or driver installation for a hassle-free setupThe 110VDSLEXT VDSL Ethernet extender kit lets you span a... More Info

APC KVM Console Extender

Extends local access to your Multi-Platform Analog KVM console (AP5201, AP5202) up to 500 feet/152 meters. -Out-of-band management: Troubleshoot servers and diagnose problems in lieu of a working operating system with POST and BIOS-level access to servers.-Remote device management: Remote monitoring of critical conditions for maximum protection against environmental and physical threats.-Scalable architecture: Cascade multiple KVM switches for a modular solution that supports multiple platforms, improving flexibility and simplifying future... More Info

Cisco Ethernet SX Fiber SFP Module

The Cisco Gigabit Ethernet Switch Module (CGESM) for the HP p-Class BladeSystem provides HP customers more integration of standard technologies they rely upon in their existing infrastructure to be optimized for the HP BladeSystem infrastructure. The CGESM is designed for seamless integration into the HP BladeSystem enclosure to take advantage of the improved efficiency, lower cost and greater flexibility of HP's blade enclosure design. The CGESM delivers 100% compatibility and consistency with well-established Cisco technology standards --... More Info

5GHz, 13dBi, Atheros MIPS 24KC, 400MHz, 32MB SDRAM, 8MB Flash, Fast Ethernet,...

NanoStation Loco MThe NanoStation M combines Powerful airMAX CPE radio and MIMO antenna array performance in a compact form factor.airMAX TDMA ProtocolairMAX M series Technology provides performance improvements in latency, throughput, & scalability compared to other outdoor systems in its class.Powerful Software FeaturesPowered by Ubiquiti's powerful airOS loaded with features and optimizations for outdoor wireless performance, Ubiquiti's airMAX platform also features airView Spectrum Analysis and airControl central device... More Info

5GHz, 25dBi, 400mm

Incorporating a dish reflector design with advanced technology, the PowerBeam™is the latest generation of Ubiquiti Networks®airMAX®CPE for customer locations. More Info

PBE-5AC-620 - 5GHz, 29dBi, 620mm

Incorporating a dish reflector design with proprietary airMAX®ac technology, the PowerBeam™ac is ideal for CPE deployments requiring maximum performance. More Info

HP 6120XG Blade Switch

Designed for c-Class BladeSystem and HP Integrity Superdome 2 enclosures, HP 6120XG Blade Switch provides sixteen 10 Gb downlinks and eight 10 Gb SFP+ uplinks (with dual personality CX4 and SFP+ 10 Gb uplink, and two 10Gb cross-connects). Industry standard Layer 2 switching functions, QOS metering, security and high availability features complete this capable switch. It is perfectly suited for data centers migrating to next generation 10 Gb high-performance architectures. With support of dual speed (1 Gb/10 Gb) on the uplinks and Converged... More Info

5150-5875 MHz, 25dBi, GigabitEthernet, 8.5W, 3220g

5 GHz airMAX® ac Bridge with RF Isolated ReflectorIncorporating advanced engineering with proprietary airMAX ac technology, the PowerBeam® ac ISO is ideal for deployments requiring maximum performance and RF isolation.Performance BreakthroughairMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF... More Info

HP 6125G Ethernet Blade Switch

Do you need a 1Gb switch that increases your data center efficiency and capability? Designed for the c-Class BladeSystem enclosure, the HP 6125G Ethernet Blade Switch appeals to budget-conscious data centers that need 1Gb switching and routing with the resiliency of Intelligent Resilient Networking (IRF), stacking, and the stability of Comware. It is ideal for remote office applications, or wherever IPv6, full Layer 3 routing and distributed trunking are required for 1Gb applications. More Info

Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem

The Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem provides HP customers with an integrated switching platform providing Cisco resiliency, advanced security and enhanced manageability to the server edge while dramatically reducing cabling requirements. The Catalyst Blade Switch 3020 capitalizes on your current Cisco network infrastructure to reduce the total cost of implementation and ownership. By utilizing the advanced Cisco end-to-end management framework, customers can simplify current and future deployments reducing... More Info

HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem

The HP 1Gb Ethernet Pass-Thru Module for c-Class BladeSystem is designed for those customers desiring an unmanaged direct connection between each server blade within the enclosure and an external network device such as a switch, router or hub. Ideal for datacenters with existing network infrastructure, the HP 1Gb Ethernet Pass-Thru Module delivers sixteen internal 1Gb downlinks and sixteen external 1Gb RJ-45 copper uplinks, providing a 1:1 non-switched, non-blocking path between the server and the network. Designed to fit into a single I/O... More Info

450 Mbps, 23 dBi, MIPS 74Kc, 10/100/1000 Ethernet, 64 MB DDR2, 24V, 0.3A,...

The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.Management Wi-Fi RadioThe LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Mounting and Surge ProtectionFeaturing enhanced protection against ESD events, the LiteBeam® AC offers a more robust mount with separate azimuth and elevation adjustments.Now with airOS®8 and airView®airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an... More Info

5 Ghz, 450 Mbps, 19 dBi, 10/100/1000 Ethernet, 128 MB DDR2, 8 MB Flash, 1.5:1...

Incorporating innovative industrial design with proprietary airMAX® ac technology, the NanoBeam® AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint.Management Wi-Fi RadioThe NanoBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge ProtectionThe NanoBeam® AC features enhanced protection against ESD events.Superior ProcessingUbiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon... More Info