Antennas (61 products)

Dual-Band Omnidirectional Antenna for Cisco Aironet 1600e, 2600e, and 3600e...

The next generation of Cisco® Aironet® 802.11naccess points – the Cisco Aironet 1600e, 2600e, 3600e Series and 1550 Series – requires the use of dual-band external antennas to make them fully functioning units. As these access points take greater advantage of the multiple-input multiple-output (MIMO) features supported under the 802.11n standard, the number of radio transceivers per frequency band has increased. Using dual-band antenna ports allows the access point to support these added transceivers while maintaining a reasonably low number... More Info

Dual-Band Omnidirectional Antenna, 2.4/5 GHz, 7 dBi max.

Dual-Band Omnidirectional Antenna for Cisco Aironet 1550 Series Access Points More Info

14 dBi Dual Port Patch Antenna, 5.15 - 5.9 GHz

5 GHz, 14 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30 inch cables terminated in right angle N-type connectors. More Info

Single-Band Directional Antenna, 2.4 GHz, 13 dBi, 2x N-Type

Single-Band Directional Antenna for Cisco Aironet 1550 Series Access Point More Info

8 dBi Dual Band Patch Antenna, 2.5/5 GHz

2.4 GHz, 8 dBi and 5 GHz 8 dBi dual band directional antenna with three N-type connectors. It can be used with the outdoor Access Points and has no cable attachments. More Info

Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular

The Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular antenna is designed to cover domestic LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and GSM900/GSM1800/UMTS/LTE2600 bands and is supported on the Cisco CGR 2010, 1240, and the 1120 routers. The Omnidirectional Outdoor Antenna is compatible with Cisco 2G, 3G, and 4G cellular devices that use a Type N connector and requires a mast-mounted outdoor antenna. More Info

Integrated 4G Low-profile Outdoor Saucer Antenna

- Applicable for both 3G and 4G solutions- Domestic LTE 700 band and global LTE 2600 band- Domestic cellular and global GSM- Weatherproof UV stable radome- Performance optimized- Excellent flame rating More Info

Short Dual-Band Omni Antenna, 2.4-2.5/5.15-5.925 GHz, 5 dBi, 50 g

Cisco Aironet Short Dual-Band Omni AntennaThe antenna operates over the 2.4 GHz and 5 GHz Wi-Fi bands and is designed for indoor use with the AP1600, AP2600, AP3600, and AP3700 series access points. The antenna utilizes an omnidirectional radiation pattern to achieve a broad coverage area.Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It does not articulate as the other dipole antennas. It can be used with the 1600/2600/3600/3700 APs More Info

Single Band 2.4 GHz Omnidirectional ISA100 Antenna, 5 dBi

The Cisco Aironet 1550 Series Outdoor Mesh Access Point for Hazardous Locations (hereafter called the access point or AP) is a modularized wireless outdoor access point designed for use in a mesh network. The access point also supports wireless client access, point-to-point bridging, point-to-multipoint bridging, and point-to-multipoint mesh wireless connectivity. More Info

Four-Port Dual-Band Polarization-Diverse Antenna, 2.4-2.5/5.15-5.925 GHz, 13...

Cisco Aironet Four-Port Dual-Band Polarization-Diverse AntennaThis document describes the AIR-ANT2513P4M-N antenna and provides electrical specifications and mounting instructions. The antenna is a four-port polarization-diverse patch array that operates over the 2.4-GHz and 5-GHz Wi-Fi bands. It ships with an articulating mount for use on flat surfaces and masts and is adjustable in both the horizontal and vertical planes. The radome is paintable using commonly available non-conductive spray paints, such as Krylon or Rust-Oleum. The antenna... More Info

Two radios (4x4:3 5 GHz and 4x4:3 2.4 GHz) with External Antennas, AC, DC, or...

The Cisco Aironet 1570 Series Outdoor Access Point (hereafter called the access point or AP) is a wireless outdoor access point which is designed for use in a variety of network configurations. The access point can be configured, monitored, and operated through a Cisco wireless LAN controller (hereafter called a controller). The controllers use a browser-based management system, a command-line interface (CLI), or the Cisco Prime Infrastructure (PI) network management system to manage the controller and the associated access points. The... More Info

2.4 GHz/5GHz, 50 Ohms, 4-dBi/7-dBi, N-Male, IP66, IP67, Grey, Spare

This describes the Cisco Aironet AIR-ANT2547VG-N dual-band omni-directional antenna, and provides specifications and mounting instructions. The antenna is designed for outdoor use with Cisco Aironet Outdoor Access Points (hereafter referred to as access points) with radios operating in the 2.4 GHz and 5 GHz frequency bands. More Info

3W, 50ohm, TNC male, 2dBi

The 4G-LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services Routers Generation 2 (ISRs G2) and Enhanced High-Speed WAN Interface Cards (EHWICs).The 4G-LTE-ANTM-D antenna is marked with a green band and the product ID (PID) to indicate that it supports 4G Long Term Evolution (LTE) networks. It has the following hardware features: - Articulating Joint—It can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90... More Info

Multiband Panel Outdoor 4G Antenna

Multiband Panel Outdoor 4G Antenna More Info

2.4GHz 6dBI, 5GHz 8dBI

Cisco Aironet Dual-Band Omnidirectional Antenna (AIR-ANT2568VG-N) is designed for outdoor use with Cisco Aironet Outdoor Access Points (hereafter referred to as access points) with radios operating in the 2.4-GHz and 5-GHz frequency bands.Installation NotesThe antenna is designed to connect to a dedicated antenna port on the access point. No special tools are required to install the antenna.The antenna is resistant to the full range of outdoor environments. After the antenna is attached to the access point, seal the connections to prevent... More Info