Antennas (61 products)

2.4GHz, 150+Mbps, 18dBi, 20+km, 300mm, White

High-Performance airMAX® BridgeIncorporating a dish reflector design with advanced technology, the PowerBeam™ is the latest generation of Ubiquiti Networks® airMAX® CPE for customer locations.Models: PBE‑M2‑400, PBE‑M5‑300, PBE‑M5‑400, PBE‑M5‑620Integrated Radio DesignUbiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.Plug and Play InstallationThe PowerBeam™ requires no tools for... More Info

5GHz, 150+Mbps, 22dBi, 20+km, 300mm, White

High-Performance airMAX® BridgeIncorporating a dish reflector design with advanced technology, the PowerBeam™ is the latest generation of Ubiquiti Networks® airMAX® CPE for customer locations.Models: PBE‑M2‑400, PBE‑M5‑300, PBE‑M5‑400, PBE‑M5‑620Integrated Radio DesignUbiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.Plug and Play InstallationThe PowerBeam™ requires no tools for... More Info

Multiband Swivel-Mount Dipole Antenna

The Cisco 3G-ANTM1919D antenna operates in the 806- to 960-MHz and 1710- to 2170-MHz frequency bands, and is designed for use with Cisco 3G wireless high speed WAN interface cards (HWICs). The Cisco 3G-ANTM1919D antenna is compatible with the Cisco 3G wireless WAN HWICs using a threaded Neill-Concelman (TNC) male connector with articulating joint.This antenna has the following features:- Multiband performance. 806-960 MHz and 1710-2170 MHz.- Articulating joint provides 0 to 90 degrees pivot and 180-degree swivel movement, allowing vertical... More Info

5GHz, 30dBi

Innovative Industrial DesignWeighing in at only 7.4 kg, the RocketDish LW is engineered with ruggedized yet lightweight components to withstand harsh outdoor conditions.Plug and Play IntegrationThe RocketDish LW has a built-in Rocket™ mount, so no tools are needed to install the Rocket BaseStation.Optional Isolator RadomeThe IsoBeam™ enhances isolation performance for co-location and features an integrated protective radome.Optional Alignment AccessoryThe Precision Alignment Kit enables extremely accurate aiming for optimal link performance. More Info

2.4 GHz Aironet Triple Omni Antenna

This antenna was specifically designed for the Cisco Aironet 1250 Series. To support the 2.4-GHz IEEE 802.11n draft 2.0 radio modules with MIMO technology, the 2.4-GHz ceiling omnidirectional antenna was developed. It contains three antenna elements in a single white flush mount enclosure, providing an aesthetically pleasing option for installation in drop-ceiling office environments. More Info

5GHz, 25dBi, 6W, Dual linerear polarization, outdoor

5 GHz airMAX® Bridge with RF Isolated ReflectorIncorporating advanced engineering with proprietary airMAX technology, the PowerBeam®M5 ISO is ideal for deployments requiring maximum performance and RF isolation.Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.Superior RF IsolationCompare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are... More Info

Lightning Arrestor

Overvoltage transients can be created through lightning static discharges, switch processes, direct contact with power lines, or through earth currents. The Cisco Aironet AIR-ACC245LA-R Lightning Arrestor limits the amplitude and duration of disturbing interference voltages and improves the overvoltage resistance of in-line equipment, systems, and components. A lightning arrestor installed according to these mounting instructions balances the voltage potential, thus preventing inductive interference to parallel signal lines within the... More Info

AIR-ANT2524DB-R=, RP-TNC, Dual-band, 2.4-2.5GHz/2dBi, 5.15-5.85GHz/4dBi,...

The Cisco Aironet high-performance, dual-band dipole antenna. The antenna operates in both the 2.4-GHz and 5-GHz frequency bands and is designed for use with Cisco Aironet 2.4-GHz and 5-GHz radio products that have dual-band reverse-polarity TNC (RP-TNC) antenna ports. The antenna has a nominal gain of 2 dBi in the 2.4-GHz frequency band and 4 dBi in the 5-GHz frequency band. More Info

Multiband Swivel-Mount Dipole Omni-directional Antenna

The AIR-ANTM2050D-R antenna operates in the 2.4- and 5-GHz bands, and is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM2050D-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector. More Info

Aironet 7-dBi Diversity Patch Antenna

The antenna operates in the 5-GHz frequency range and is designed for use in both indoor and outdoor environments. More Info

Aironet 4-dBi Omnidirectional Antenna

The antenna is designed specifically for use with pre-802.11n and 802.11n 3-antenna access points. The antenna operates in the 5-GHz frequency range and is designed for use only in an indoor office environment. The antenna assembly consists of three radiating elements, each fed with its own coaxial cable. More Info

Single Unit Antenna Extension Base (15-ft cable included), Spare

The Cisco 3G-AE015-R single-port antenna base is designed for use with portable antennas operating at frequencies up to 6 GHz that connect to 3G wireless high-speed WAN interface cards (HWICs) using a threaded Neill-Concelman (TNC) male connector. This antenna base unit, ordered separately, has 15 feet of plenum LMR-195 cable and can be used with antenna Cisco 3G-ANTM1919D.The antenna base can be wall-mounted or placed on a rack or desktop, and has the following features:-Multiple band coverage supporting cellular backahaul installations and... More Info

2.4/5 GHz Directional Antenna, 13 dBi max.

Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum rated pigtail cables, 36 inches each and 6 RP-TNC connectors. Only certified for use with AP3502P access point. More Info

Omnidirectional, Dual-Band (2.4GHz: 2dBi/5GHz: 4dBi), 4x RP-TNC Male, Ceiling...

Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors. More Info

2.4/5 GHz Directional Antenna, 13 dBi max., 4 pcs

Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum rated pigtail cables, 36 inches each and 6 RP-TNC connectors. Only certified for use with AP3502P access point. More Info