APC Airflow Management (21 products)
APC Rack Air Containment Rear Assembly for InRow RC/InRow SC
Modular air containment system designed to maximize cooling predictability, capacity, and efficiency. AdaptabilityModular design:- Compatible with standard NetShelter SX racks, providing maximum system flexibility and scalability.Front containment:- Ensures cold supply air is not captured by neighboring equipment.Rear containment:- Ensures server exhaust air is returned to the InRow cooling units for maximum cooling predictability.AvailabilityRedundancy:- Systems can be configured to included an additional InRow cooling unit to provide N+1... More Info
RETROFITTABLE CEILING ASSY 24" TO 24" RACK W/HDW
Hot aisle containment for high-density configurations. AvailabilityCable access brush strip:- Blocks air from escaping through holes surrounding cabling.AgilityCeiling tiles:- Closes off the top of the hot aisle to prevent warm air from mixing with room air.One-way locking door:- Secures the hot aisle while allowing for quick exit in case of emergency.Scaleable densities:- Scalable densities allows for higher density cooling to be achieved by integrating the Hot-aisle Containment System with in-row architecture.Modular design:- Modular... More Info
Rack Air Removal Unit SX Ducting Kit for 24" Ceiling Tiles
Performance heat removal for high-density equipment in NetShelter SX and VX enclosures. More Info
Rack Side Air Distribution 2U 208/230 50/60HZ
Air distribution for networking equipment with side to side airflow. More Info
Rack Air Removal Unit SX 100-240V 50/60HZ for NetShelter 600mm enclosures.
Performance heat removal for high-density equipment in NetShelter SX and VX enclosures. More Info
Rack Air Removal Unit SX 100-240V 50/60HZ for NetShelter 750mm enclosures.
Performance heat removal for high-density equipment in NetShelter SX and VX enclosures. More Info
Roof Fan Tray 208/230V 50/60HZ for NetShelter SX 600mm Enclosures
Promotes bottom to top airflow for an enclosure in zero U of space. Cools by exhausting heat out of the roof of the rack. More Info
InRow RD, 300mm, Air Cooled, 220-240V, 50Hz
AvailabilityPredictable coolingPlacing the unit in the row of racks moves the source of cooling closer to the heat load. This eliminates air mixing and provides a predictable cooling architecture.Rack Inlet Temperature ControlReduces the risk of hot spots at the rack levelActive response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Total Cost of OwnershipVariable speed fansVariable... More Info
NetShelter SX 42U Duct Kit for Cisco Nexus 7018
Air distribution for power dense racks and low pressure areasIncludes:Baying hardware, Foam gasket strips, Installation guide, Mounting Hardware, Side airflow ducts, Side baffles More Info
NetShelter SX 48U Duct Kit for Cisco Nexus 7018
Air distribution for power dense racks and low pressure areasIncludes:Baying hardware, Foam gasket strips, Installation guide, Mounting Hardware, Side airflow ducts, Side baffles More Info
VED for 600mm Wide Short Range / Vertical Exhaust Duct Kit for SX Enclosure
Vertical Exhaust Duct (VED) System for NetShelter SX is a low cost easy to install solution that mounts to the top rear of NetShelter enclosures to capture and return hot exhaust air to room cooling systems.Includes:Baying hardware, Duct panels, Foam gasket strips, Installation guide, Mounting Hardware, Rear door and bottom sealing kit, Roof, Roof mounting hardware More Info
VED for 600mm Wide Tall Range / Vertical Exhaust Duct Kit for SX Enclosure
Vertical Exhaust Duct (VED) System for NetShelter SX is a low cost easy to install solution that mounts to the top rear of NetShelter enclosures to capture and return hot exhaust air to room cooling systems.Includes:Baying hardware, Duct panels, Foam gasket strips, Installation guide, Mounting Hardware, Rear door and bottom sealing kit, Roof, Roof mounting hardware More Info
VED for 750mm Wide Short Range / Vertical Exhaust Duct Kit for SX Enclosure
Vertical Exhaust Duct (VED) System for NetShelter SX is a low cost easy to install solution that mounts to the top rear of NetShelter enclosures to capture and return hot exhaust air to room cooling systems.Includes:Baying hardware, Duct panels, Foam gasket strips, Installation guide, Mounting Hardware, Rear door and bottom sealing kit, Roof, Roof mounting hardware More Info
1U Blanking Panel Kit (Qty 2) Black
1U Blanking Panel Kit (Qty 2). Covers open rack space to ensure proper airflow, Promotes Proper Airflow . Includes - Mounting hardware, Qty 2 - 1U Panels Physical: Net weight - 0.20 lbs ( 0.09 kg) Net Height - 1.75 inches ( 4.45 cm) Net Width - 19.00 inches ( 48.26 cm) Net Depth - 0.10 inches ( 0.25 cm) Rack Height - 1 U Color - Black More Info