APC Power Distribution Units (114 products)

Service Bypass Panel - 200/208/240V; 30A; BBM; L6-30P input; (2) L6-30R (2)...

19 inch Rack-MountableSupplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternate power source.Quick Transfer RateTransfer rate is within the industry standard and within the time power supplies will typically drop loads. The transfer of one power source to another is seamless to the connected equipment avoiding disruption of equipment performance.Wrap Around System Bypass(3) Breaker maintenance bypass panel to isolate the UPS from the... More Info

Rack PDU, Switched, 1U, 15A, 100/120V, (8)5-15, LED

Switched Rack Power Distribution Units (PDUs) provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.Load indicator LEDIndicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.Power DelaysAllows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits... More Info

Rack ATS, 230V, 16A, (2) IEC 309 in, (1) IEC 309 out

Provides redundant rack mount power to single-corded equipment.10 kAIC Overcurrent ProtectionProvides protection in the event of a significant overcurrent event.Command line interfaceOffers simultaneous remote management access through Telnet and SSHCurrent MonitoringMonitors the aggregate current draw per power distribution unit.Cyber securityA cyber-secure connection provides improved security for your infrastructure devices, and machine data forms the basis of operational insights and analytics, aimed at reducing equipment maintenance... More Info

Actassi Power distribution rail 7 sockets 19P BS - 1U

Actassi Power distribution rail 7 sockets 19P BS - 1U. Sockets set at 90° with child protection. More Info

More Info

100-240V, 50/60Hz, 20A, 1U

AP6020AFeatures- Rack PDU, Basic, 0U/1U, 100-240V/20A, 220-240V/16A, (13) C13- Reliable rack power distribution- Includes : Installation guide , Safety guideMarketing FeaturesLow Cost Power DistributionProvides a number of outlets to bring power to rack equipment at an affordable price.Wide range of input and output connectionsProduct family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements.... More Info

36 x C13 & 6 x C19, Metered, ZeroU, 10 kVA, 208V, Black

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC... More Info

Switched, 2U, 30A, 208V, 16x C13, NEMA L6-30P, 444 x 254 x 89 mm, 6320 g

AvailabilityNetwork Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or... More Info

2U, Rack, 2880VA, 30A, 120V, 50/60Hz

AP7902BFeaturesRack PDU, Switched, 2U, 30A, 120V, (16)5-20Resettable circuit breakersEnables a quick recovery from overload events.AgilitySingle input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.Wide range of input and output connectionsProduct family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a... More Info