Cisco Network Cables (72 products)
Female DCE RS232 Cable - 3 m
One of the most complicated parts of setting up a network system (router, switch, hub, or access server) is the selection of the serial cables to connect the network system to the serial devices in your network. There are many different serial cables with seemingly similar features, and finding the correct cable can be a challenge. The information that follows will quickly and easily guide you through the process of selecting the right serial cables for your network.Selecting the proper serial cable is as easy as knowing the answers to three... More Info
RS-232 Cable DTE Male 10 Feet
The router end of all EIA/TIA-232 adapter cables is a high-density 60-pin plug. The network end of the adapter cable is a standard 25-pin D-shell connector (known as a DB-25) that is commonly used for EIA/TIA-232 connections. Figure C-5 shows the connectors at the network end of the adapter cable.Do not use the Cisco Systems-provided EIA/TIA-232 adapter cable product number CAB-232MT= to connect a T1 interface that is configured for DTE mode directly to an NEC - NEXTSTAR 1E model C4969 MD/SAC unit interface that is configured for DCE mode.... More Info
Red Colour Cable for ISDN BRI U, RJ-45, 6 feet
On the 1604-R router, there is one ISDN BRI U interface with integrated NT-1 which requires an RJ-45 straight-through cable.The cable details are:-CAB-U-RJ45=.-Red Color Cable for ISDN BRI U.-RJ-45.-6 ft. More Info
Cables V.35 Cable DTE Male 3 m.
A number of different standards defines the signaling over a serial cable (including EIA/TIA-232, X.21, V.35, EIA/TIA-449, EIA-530, and HSSI). Each standard defines the signals on the cable and specifies the connector at the end of the cable. The documentation for the device being connected should indicate the signaling standard used for that device. If you cannot find the information in the documentation, use the illustrations below to select the signaling standard required. Select the connector that will mate with the connector on your... More Info
Serial Cable CAB-X21 FC
The CAB-X21FC serial cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB-60 connector on the Cisco end and a female DB-15 connector on the network end. More Info
X.21 CABLE DTE MALE 10 FT IN (NMS)
The CAB-X21MT serial cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB-60 connector on the Cisco end and a male DB-15 connector on the network end. More Info
10GBASE-CU SFP+ Cable 3 Meter
Cisco SFP+ Copper Twinax cables are suitable for very short distances of up to 10m. Twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks. More Info
10GBASE-CU SFP+ Cable 5 Meter
Cisco SFP+ Copper Twinax cables are suitable for very short distances of up to 10m. Twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks. More Info
30cm StackPower cable, Spare
The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack. StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.A StackPower cable has colors bands on the cable ends, green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a... More Info
Cable 8 Lead Octal 68 pin - 8 RJ45
- CAB-OCTAL-ASYNC cables use a 68-pin connector & breakout cable & provideeight RJ-45 rolled cable asynchronous ports on each 68-pin connector- Allows to connect each RJ-45 rolled cable asynchronous port to the consol or Aux port of a device More Info
Cable for ISDN BRI S/T, RJ-45
Orange Color Cable for ISDN BRI S/T, RJ-45, 6 ft. More Info
Cisco Catalyst 3560 SFP Interconnect Cable (50 dcm)
The Catalyst 3560 switch supports the SFP module patch cable, a 1/2 meter, copper, passive cable with SFP module connectors at each end. The patch cable can connect two Catalyst 3560 switches in a cascaded configuration. More Info
SS-V35MT - Cable DTE 3m , for Cisco routers 2600, 3600, 3700
There are two types of devices that can communicate over a serial interface: DCE and DTE. A DCE provides a physical connection to a network and forwards traffic. A DTE connects to a network through a DCE device. Typically, a DTE device is connected to a DCE device (or vice versa) rather than another DTE device.Check the documentation that ships with your serial device to determine if it is a DTE or DCE device. If you cannot find the information in the serial device documentation. This table summarizes serial devices that can be connected to... More Info