Cisco Network Cables (72 products)
FSIP amd MIP CE1 BNC 75 Ohm - Unbalanced 5 m
One of the most complicated parts of setting up a network system (router, switch, hub, or access server) is the selection of the serial cables to connect the network system to the serial devices in your network. Cisco offers this serial cable, which is used in the Cisco 7500 series, 7000 series, Cisco 4000 series, Cisco 3600 series, and Cisco access server systems. More Info
Cisco ISDN Pri Cable 10 Feet
The access server comes with a console and auxiliary cable kit that contains the cable and adapters you need to connect a console (an ASCII terminal or PC running terminal emulation software) or modem to your access server. More Info
E1 Cable RJ-45 to Dual BNC (Unbalanced)
For E1/T1 ISDN PRI Network Module. More Info
Yellow Cable for Ethernet, Straight-through, RJ-45, 1.8m
Cisco introduces a straight-through yellow cable for Ethernet. It will never let you down providing the most reliable connection all over your network. More Info
CISCO ENET CROSSOVER CABLE FOR CISCO FAMILY NS (PC)
Fast Ethernet Crossover cable. For fast and clear connection with Cisco family devices. More Info
Cisco Cable ADSL cable straight RJ11(lavender)
If you have a Cisco 827-4V router, you can connect analog telephones or fax machines to your router. Use the cables provided with these devices.The gray PHONE 1, 2, 3, and 4 ports are RJ-11 connectors. If you are outside North America, you must buy and attach adapters that allow telephones or faxes to be connected to the RJ-11 connectors. In some countries, these adapters need additional electronics to convert the telephones or faxes to work properly with the router phone ports. For example, in the United Kingdom, you must buy an adapter... More Info
Cable adapter E1 > RJ-48C 2m
One of the most complicated parts of setting up a network system is the selection of the serial cables to connect the network system to the serial devices in your network. CISCO cables are high performance and high quality. The cables have been tested by Cisco technical experts to ensure they meet the Cisco rigid quality standards.??The 75-120-ohm adapter cable connects Cisco 120-ohm E1 port adapters to 75-ohm unbalanced G.703 E1 lines. The adapter has an eight-pin RJ-48C connector on the 120-ohm side and dual BNC coaxial connectors... More Info
5ft./1.52m low loss cable, 1x RP-TNC plug, 1x RP-TNC jack, Interconnect, Black
Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility. More Info
Cisco 20 ft LOW LOSS CABLE ASSEMBLY W RP-TNC CONNECTORS
The antennas in a wireless network installation must be close to the users. The location of the antennas are not necessarily required to be close to the connected switch or to a computer room. The cable run can be 100 feet or more from the AP or bridge to antenna locations.RF energy is carried between the antennas and the radio equipment through a coaxial cable. An antenna cable introduces signal loss in the antenna system for both the transmitter and receiver. To reduce signal loss, minimize the cable length and use only low-loss or ultra... More Info
50 ft. cable with RP-TNC connectors
LL cable extends the length between any Aironet product and its antenna. With a loss of 6.7 decibels (dB) per 100 feet (30 meters [m]) for LL cable and 4.4 dB for the ULL cable, these cables provide installation flexibility without a significant sacrifice in range or performance. Cisco LL and ULL cables are not plenum rated More Info
100ft. cable with RP-TNC connectors
LL cable extends the length between any Aironet product and its antenna. With a loss of 6.7 decibels (dB) per 100 feet (30 meters [m]) for LL cable and 4.4 dB for the ULL cable, these cables provide installation flexibility without a significant sacrifice in range or performance. Cisco LL and ULL cables are not plenum rated More Info
150 ft. cable with RP-TNC connectors
LL cable extends the length between any Aironet product and its antenna. With a loss of 6.7 decibels (dB) per 100 feet (30 meters [m]) for LL cable and 4.4 dB for the ULL cable, these cables provide installation flexibility without a significant sacrifice in range or performance. Cisco LL and ULL cables are not plenum rated More Info