LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.



10/100 BaseT Connection

Connect the device to a network using a 10 or 100 BaseT connection



Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.



Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance



Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.



Scalable runtime

Allows additional run time to be quickly added as needed.



Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.



Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced



Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.



Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.



Network manageable

Provides remote power management of the UPS over the network.



InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.



SmartSlot

Customize UPS capabilities with management cards.



LED status indicators

Quickly understand unit and power status with visual indicators.



Serial connectivity

Provides management of the UPS via a serial port.



Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.



Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.



Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.



User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)



Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.



Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.



Disconnected battery notification

Warns when a battery is not available to provide backup power.



Audible alarms

Provides notification of changing utility power and UPS power conditions



Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.



Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.



Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.



Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.



Cold-start capable

Provides temporary battery power when the utility power is out.



Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse.



Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.