Fibre Cables (374 products)

StarTech.com 7m Single Mode Duplex Fiber Patch Cable - LC to LC OS1 Single...

Provide a high-performance link between fiber network devicesThe SMFIBLCLC7 7m LC to LC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications.This LC-LC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire – an ideal solution for use in industrial... More Info

Cat6, 5ft, RJ-45, 550MHz, 1Gbps

With Tripp Lite's new category 6 molded patch cables you can stay ahead of the game by using this high-speed cable to distribute data, voice and video. These cables deliver stable performance up to 550MHz. Each comes UL verified meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum. Designed for use in category 6, category 5e and category 5 applications. Cat6 cables are available in a variety of colors with a snagless... More Info

10m ST/ST LSZH Duplex 62.5/125 Multimode Fibre Patch Cable

High speed multimode fibre cables that provide protection from toxic and corrosive gassesLow-Smoke Zero-Halogen (LSZH) Fibre Optic Patch Jumpers from Cables To Go are designed to lessen the emissions of smoke and halogens when the cable is exposed to extreme temperatures. These fibre patch jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet applications. Use to connect fibre optic equipment to fibre optic cross-connects, Cables and information outlets. Each cable is individually 100% optically inspected and tested... More Info

StarTech.com 4m Single Mode Duplex Fiber Patch Cable - LC to SC OS1 Single...

Provide a high-performance link between fiber network devicesThe SMFIBLCSC4 4m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications.This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire – an ideal solution for use in industrial... More Info

Duplex Multimode 50/125 Fiber Patch Cable (SC/SC), 2M

Tripp Lite's 2-Metre multimode duplex Fibre Channel SC/SC patch cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks as well. Also available in 1, 3, 5, 10, 15, 30, and 50 Metre lengths. Search "N506-" to bring... More Info

StarTech.com 7m Single Mode Duplex Fiber Patch Cable - LC to SC OS1 Single...

Provide a high-performance link between fiber network devicesThe SMFIBLCSC7 7m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications.This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire – an ideal solution for use in industrial... More Info

3m ST/ST LSZH Duplex 62.5/125 Multimode Fibre Patch Cable

Low-Smoke Zero-Halogen (LSZH) Fibre Optic Patch Jumpers from Cables To Go are designed to lessen the emissions of smoke and halogens when the cable is exposed to extreme temperatures. These fibre patch jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet applications. Use to connect fibre optic equipment to fibre optic cross-connects, Cables and information outlets. Each cable is individually 100% optically inspected and tested for insertion loss and quality. All cables meet or exceed industry specifications. More Info

Duplex Multimode 62.5/125 Fiber Adapter (LC-ST M/F) 0.3M (1-ft.)

Tripp Lite's N457-001-62, 62.5/125 micron, LC/ST Male-to-Female Fiber adapter cable allows you to utilize older installed ST fiber cables when upgrading to newer switches using LC type SFP or GBIC transceivers. Simply plug the LC male end into the new switch, and plug your existing ST cables into the Female ST ends. No need to scrap your existing fiber cable plant with all new cables. For installations utilizing 50/125 micron cable, see N457-001-50. Utilize Existing SC or ST Cabling with new LC type switches LC/ST or LC/SC Save money by... More Info

StarTech.com 10m Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 -...

The A50FBLCLC10 10m 850nm Laser-Optimized Multimode Fiber (LOMMF) Aqua Cord features 50/125 micron fiber for high-speed, high bandwidth data transmissions over 10 Gigabit Ethernet and Fiber Channel networks - the perfect solution for fiber cable runs between multiple backbone switches, hubs and routers as well as higher end networking equipment.This LC-LC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a... More Info

QSFP28/ QSFP28 Fibre optic, 2 m

This Dell Networking Cable, 100GbE QSFP28 to QSFP28, Passive Copper Direct Attach Cable is used to link your fiber networking devices for high-speed, long-distance connectivity. This 2 m cable features an QSFP28 connector at one end and QSFP28 connector at the other end.- Provides the necessary link between fiber networking devices for high-speed, long-distance connectivity- Features an QSFP28 connector at one end and QSFP28 connector at the other end- Measures 2 m in lengthThis product is compatible with the following systems:- Dell... More Info

2m ST/ST LSZH Duplex 62.5/125 Multimode Fibre Patch Cable

High speed multimode fibre cables that provide protection from toxic and corrosive gassesLow-Smoke Zero-Halogen (LSZH) Fibre Optic Patch Jumpers from Cables To Go are designed to lessen the emissions of smoke and halogens when the cable is exposed to extreme temperatures. These fibre patch jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet applications. Use to connect fibre optic equipment to fibre optic cross-connects, Cables and information outlets. Each cable is individually 100% optically inspected and tested... More Info

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to LC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info

Duplex Singlemode 8.3/125 Fiber Patch Cable (LC/LC), 1M

Tripp Lite's 1-Metre (3ft), singlemode duplex fiber optic LC/LC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. - Premium PVC 8.3/125 micron singlemode patch cables - Attenuation loss meets or exceeds the latest industry standards - Twice the bandwidth throughput of multimode cable System Requirements - Any fiber optic hardware or NIC card requiring singlemode... More Info

100GbE QSFP28 - QSFP28, Passive Copper Direct Attach Cable, 3 m, Customer Kit

This Dell Networking Cable, 100GbE QSFP28 to QSFP28, Passive Copper Direct Attach Cable is used to link your fiber networking devices for high-speed, long-distance connectivity. This 3 m cable features an QSFP28 connector at one end and QSFP28 connector at the other end. - Provides the necessary link between fiber networking devices for high-speed, long-distance connectivity- Features an QSFP28 connector at one end and QSFP28 connector at the other end- Measures 3 m in lengthDesigned For:Dell Networking S6100-ON, Z9100-ON More Info

StarTech.com 1m Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 -...

The A50FBLCLC1 1m 850nm Laser-Optimized Multimode Fiber (LOMMF) Aqua Cord features 50/125 micron fiber for high-speed, high bandwidth data transmissions over 10 Gigabit Ethernet and Fiber Channel networks - the perfect solution for fiber cable runs between multiple backbone switches, hubs and routers as well as higher end networking equipment.This LC-LC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire... More Info