Fibre Cables (374 products)

20M LC/SC OM4 LSZH FIBRE PATCH - VIOLET

This OM4 Duplex Multimode fibre optic cable is ideal for connecting 40GBase-SR4 and 100GBase-SR10, SFP+ and QSFP+ transceivers for 40 and 100 gigabit network connections. This cable provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 40 or 100 gigabit Ethernet applications in a data centre or wiring closet.- Constructed to support OM4 transmission standards- Multimode fibre construction - 50/125 diameter core and cladding- Support for 40... More Info

30M LC/SC OM4 LSZH FIBRE PATCH - VIOLET

This OM4 Duplex Multimode fibre optic cable is ideal for connecting 40GBase-SR4 and 100GBase-SR10, SFP+ and QSFP+ transceivers for 40 and 100 gigabit network connections. This cable provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 40 or 100 gigabit Ethernet applications in a data centre or wiring closet.- Constructed to support OM4 transmission standards- Multimode fibre construction - 50/125 diameter core and cladding- Support for 40... More Info

15M LC/SC OM4 LSZH FIBRE PATCH - VIOLET

This OM4 Duplex Multimode fibre optic cable is ideal for connecting 40GBase-SR4 and 100GBase-SR10, SFP+ and QSFP+ transceivers for 40 and 100 gigabit network connections. This cable provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 40 or 100 gigabit Ethernet applications in a data centre or wiring closet.- Constructed to support OM4 transmission standards- Multimode fibre construction - 50/125 diameter core and cladding- Support for 40... More Info

MTP/MPO Patch Cable with Push/Pull Tabs, 12 Fiber, 40GbE, 40GBASE-SR4, OM3...

Tripp Lite's MTP/MPO to MTP/MPO fiber patch cables allow high-density connections between network equipment in telecommunication rooms. They feature Push/Pull tab connectors that offer maximum accessibility in high density installations; install / remove with one hand. The MTP/MPO connector is approximately the same size of a SC connector but since it can accommodate 12 fibers, it provides up to 12 times the density, thereby offering savings in circuit card and rack space. N844 series cables are manufactured using laser-optimized, 50/125,... More Info

Duplex Singlemode 8.3/125 Fiber Patch Cable (LC/ST), 20M

Tripp Lite's 20-meter ( 66ft ), singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end, ST connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.- Premium PVC 8.3/125 micron singlemode patch cables - Attenuation loss meets or exceeds the latest industry standards - Twice the bandwidth throughput of multimode cable - Manufactured from 8.3/125 duplex (zipcord) fiber - PVC jacket - Length:... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (ST/ST), 15M

Tripp Lite's 15-meter multimode duplex fiber optic ST/ST patch cable is manufactured from 62.5/125 zipcord fiber. The cable has ST connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.- Premium PVC 62.5/125µm multimode patch cables- Attenuation loss meets or exceeds the latest industry standards- Manufactured from 62.5/125 duplex (zipcord) fiber - PVC jacket - Length: 15-meters (50-ft.) Connectors: 2 ST connectors on each end- Insertion loss testing performed on... More Info

MTP/MPO Patch Cable, 12 Fiber, 40GbE, 40GBASE-SR4, OM3 Plenum-Rated - Aqua,...

Tripp Lite MTP/MPO to MTP/MPO fiber patch cables allow high-density connections between network equipment in telecommunication rooms. They feature Push/Pull tab connectors that offer maximum accessibility in high density installations; install / remove wi More Info

10Gb Duplex Multimode 50/125 OM3 LSZH Fiber Patch Cable (LC/SC) - Aqua, 3M

Tripp Lite introduces it's new OM3 Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, SC/LC Fiber Optic cables, provide nearly four times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Single mode cable, at a much reduced cost. LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective,... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (LC/SC), 20M

Tripp Lite's 20-meter ( 66ft ) multimode duplex fiber optic SC/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC to SC connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.- Premium PVC 62.5/125µm multimode patch cables- Attenuation loss meets or exceeds the latest industry standards- Manufactured from 62.5/125 duplex (zipcord) fiber - PVC jacket - Length: 20-meter (66-ft.) Connectors: 2 SC/LC connectors on each end - Insertion loss testing performed... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (LC/ST), 2M

Tripp Lite's 2-meter multimode duplex fiber optic ST/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC to ST connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. - Manufactured from 62.5/125 duplex (zipcord) fiber - Ideal for LAN applications - Glass fiber composition System Requirements - Any fiber optic hardware or NIC card requiring multimode duplex cable with ST/LC connectors - 2-meter duplex MMF LC/ST 62.5/125 fiber cable - Manufactured from... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (LC/LC) - Red, 10M

Tripp Lite's Red, 10-meter multimode duplex micron fiber optic LC/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC connectors on each end, a PVC jacket, and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. Ideal for color coding the cable plant.- Manufactured from 62.5/125 duplex (Zipcord) fiber with Red jacket - Length: 10 meter Connectors: LC connector on each end- Insertion loss testing performed on every connector (0.2dB typical) - Red PVC jacket- Fiber made from glass... More Info

Singlemode Fiber Optics 1-meter (3-ft.) Duplex SMF 8.3/125 Patch Cable, SC/SC

Tripp Lite's 1-meter, single mode duplex fiber optic SC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket, and is FDDI and OFNR rated. Duplex single mode fiber is most commonly used in LAN app More Info

Singlemode Fiber Optics 10-meter (33-ft.) Duplex SMF 8.3/125 Patch Cable, LC/SC

Tripp Lite's 10-meter singlemode duplex fiber optic LC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most More Info

Duplex Multimode 50/125 Fiber Patch Cable (LC/LC), 100M

Tripp Lite's 100-meter multimode duplex Fibre Channel optic LC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has LC connectors on each end. It has a PVC jacket and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and provides built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks as well. Also available in 1, 2, 3, 5, 10, 15, 20, 25, 30, and 50 meter... More Info

10Gb Duplex Multimode 50/125 OM3 LSZH Fiber Patch Cable (SC/SC) - Aqua, 10M

Tripp Lite introduces it's new OM3 Laser-Optimized Multimode Fiber (LOMMF) Aqua cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, SC/SC Fiber Optic cables, provide nearly four times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Single mode cable, at a much reduced cost. LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective,... More Info