Fibre Cables (370 products)

Duplex Multimode 62.5/125 Fiber Patch Cable (ST/ST), 10M

Tripp Lite's 10-meter multimode duplex fiber optic ST/ST patch cable is manufactured from 62.5/125 zipcord fiber. The cable has ST connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.- Premium PVC 62.5/125µm multimode patch cables- Attenuation loss meets or exceeds the latest industry standards- Manufactured from 62.5/125 duplex (zipcord) fiber - PVC jacket- Length: 10-meters(32.8-ft.) Connectors: 2 ST connectors on each end- Insertion loss testing performed on... More Info

7m LC-SC 10Gb 50/125 OM3 Duplex Multimode PVC Fibre Optic Cable (LSZH) - Aqua

This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic and corrosive gases in poorly ventilated spaces and other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 Gigabit Ethernet applications. More Info

StarTech.com QSFP+ Active Optical Cable - 49 ft / 15m - MSA Compliant - 40G...

This 40G QSFP+ cable delivers what you need most in your network connections: reliable performance. It’s built to MSA specifications and fully tested to ensure seamless compatibility.This active optical cable (AOC) is fully hot-pluggable and supports 40 Gigabit Ethernet applications connected through QSFP+ (Quad Small Form-Factor Pluggable) ports. The AOC cable is lighter and more flexible than QSFP+ direct-attach cables which makes it ideal for installation in tight spaces and over longer distances.Designed for high-speed interconnects,... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (SC/ST), 2M (6-ft.)

Tripp Lite's 1.83 m (6-ft.) multimode duplex fiber optic SC/ST patch cable is manufactured from 62.5/125 zipcord fiber. The cable has ST to SC connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. - Premium PVC 62.5/125µm multimode patch cables - Attenuation loss meets or exceeds the latest industry standards - Loop-back cables provide an easier, "single-person" solution for testing fiber optic cable systemsSystem Requirements - Any fiber optic hardware or NIC card requiring... More Info

10m LC-SC 10Gb 50/125 OM3 Duplex Multimode PVC Fibre Optic Cable (LSZH) - Aqua

This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic and corrosive gases in poorly ventilated spaces and other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 Gigabit Ethernet applications. More Info

StarTech.com Cisco SFP-10G-AOC3M Compatible - 9.8 ft / 3m - 10Gb SFP+ Cable -...

This 10G SFP+ cable delivers what you need most in your network connections: reliable performance. It’s built to MSA specifications and fully tested to ensure seamless compatibility.This active optical cable (AOC) is fully hot-pluggable and supports 10 Gigabit Ethernet applications connected through SFP+ (Small Form-Factor Pluggable) ports. The AOC cable is lighter and more flexible than SFP+ direct-attach cables which makes it ideal for installation in tight spaces and over longer distances.Designed for high-speed interconnects, this... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (SC/ST), 3M (10-ft.)

Tripp Lite's 3.05 m (10-ft.) multimode duplex fiber optic SC/ST patch cable is manufactured from 62.5/125 zipcord fiber. The cable has ST to SC connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. - Premium PVC 62.5/125µm multimode patch cables - Attenuation loss meets or exceeds the latest industry standards System Requirements - Any fiber optic hardware or NIC card requiring multimode duplex cable with SC/ST connectors - 3.05 m (10-ft.) duplex MMF cable ST/SC 62.5/125 fiber... More Info

StarTech.com Cisco SFP-10G-AOC5M Compatible - 16.4 ft / 5m - 10Gb SFP+ Cable...

This 10G SFP+ cable delivers what you need most in your network connections: reliable performance. It’s built to MSA specifications and fully tested to ensure seamless compatibility.This active optical cable (AOC) is fully hot-pluggable and supports 10 Gigabit Ethernet applications connected through SFP+ (Small Form-Factor Pluggable) ports. The AOC cable is lighter and more flexible than SFP+ direct-attach cables which makes it ideal for installation in tight spaces and over longer distances.Designed for high-speed interconnects, this... More Info

1m SC-SC 9/125 OS1 Duplex Singlemode PVC Fibre Optic Cable (LSZH) - Yellow

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info

StarTech.com MPO/MTP to LC Breakout Cable - Plenum-Rated - OM3, 40Gb -...

Fan out eight fibers from a 40Gbps MPO connection to four 10Gbps LC connectionsThis MPO/MTP to 8x LC breakout cable lets you fan out a single 40Gbps connection from a 40GBase-SR4 QSFP+ transceiver to four 10Gbps LC SFP+ transceivers.The push-and-pull tabs optimize accessibility and let you install or remove the connectors with one hand, without using additional tools. Plus, the slim uniboot design of the LC connectors saves space and improves cable management.The MPO cable is housed in a plenum-rated jacket and is ideal for installations... More Info

2m SC-SC 9/125 OS1 Duplex Singlemode PVC Fibre Optic Cable (LSZH) - Yellow

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info

StarTech.com MPO/MTP Fiber Optic Cable - Plenum-Rated - OM3, 40Gb -...

Terminate twelve fiber connections using a single 40 Gigabit network cable -- designed for high-density fiber networksThis MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual 10Gbps devices.The MTP... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (SC/SC), 0.3M (1-ft.)

Tripp Lite's 1-ft. ( 0.3 meters ) multimode duplex fiber optic SC/SC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket and is FDDI and OFNR rated. duplex multimode fiber is most commonly used in LAN applications.- Premium PVC 62.5/125µm multimode patch cables- Attenuation loss meets or exceeds the latest industry standards- Manufactured from 62.5/125 duplex (zipcord) fiber - PVC jacket- Length: 1-ft. (0.3 meters)- Connectors: 2 SC connectors on each end - Insertion loss testing... More Info

StarTech.com MPO/MTP Fiber Optic Cable - Plenum-Rated - OM3, 40Gb -...

Terminate twelve fiber connections using a single 40 Gigabit network cable -- designed for high-density fiber networksThis MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual 10Gbps devices.The MTP... More Info

5m SC-SC 9/125 OS1 Duplex Singlemode PVC Fibre Optic Cable (LSZH) - Yellow

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info