Network Accessories (1857 products)

Duplex Singlemode 8.3/125 Fiber Patch Cable (LC/SC), 3M

Tripp Lite's 3-Metre (10ft) singlemode duplex fiber optic LC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. - Premium PVC 8.3/125 micron singlemode patch cables - Attenuation loss meets or exceeds the latest industry standards - Twice the bandwidth throughput of multimode cable System Requirements - Any fiber optic hardware or NIC card requiring... More Info

1.5m Cat6A Booted Unshielded (UTP) Low Smoke Zero Halogen (LSZH) Network...

For fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6A TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs are bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimises Near-End Crosstalk (NEXT) levels with a LSZH outer jacket. The moulded, snagless boot prevents unwanted cable snags during... More Info

SFP+ 10Gbase-CU Passive Twinax Copper Cable, Black, 6M (20-ft.)

Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking. See "Features" tab for... More Info

Duplex Singlemode 8.3/125 Fiber Patch Cable (LC/SC), 5M

Tripp Lite's 5-meter, single mode duplex fiber optic LC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex single mode fiber is most commonly used in LAN applications.- Premium PVC 8.3/125 micron singlemode patch cables- Attenuation loss meets or exceeds the latest industry standards- Twice the bandwidth throughput of multimode cable- Manufactured from 8.3/125 duplex (zipcord) fiber - PVC jacket- Length: 1-meter.... More Info

StarTech.com 50 ft Cat 6 Gray Molded RJ45 UTP Gigabit Cat6 Patch Cable - 50ft...

Make Power-over-Ethernet-capable Gigabit network connectionsThe C6PATCH50GR Cat 6 Patch Cable (50 ft) meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections, and features a durable gray PVC jacket that enables you to color code your network cable runs as needed.To ensure long-lasting performance, this high quality Cat 6 patch cable features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could... More Info

SFP+ 10Gbase-CU Passive Twinax Copper Cable, Black, 7M (23-ft.)

Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking.See "Features" tab for... More Info

Duplex Singlemode 8.3/125 Fiber Patch Cable (LC/SC), 25M

Tripp Lite's 25-meter ( 82ft ) singlemode duplex fiber optic LC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.- Premium PVC 8.3/125 micron singlemode patch cables- Attenuation loss meets or exceeds the latest industry standards- Twice the bandwidth throughput of multimode cable- Manufactured from 8.3/125 duplex (zipcord) fiber- PVC jacket - Length: 25... More Info

SFP+ 10Gbase-CU Passive Twinax Copper Cable, Black, 0.5M (20-in.)

Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking.See "Features" tab for... More Info

Duplex Singlemode 8.3/125 Fiber Patch Cable (LC/ST), 1M

Tripp Lite's 1-Metre (3ft), singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end, ST connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. - Premium PVC 8.3/125 micron singlemode patch cables - Attenuation loss meets or exceeds the latest industry standards - Twice the bandwidth throughput of multimode cable System Requirements - Any fiber optic hardware or NIC card requiring... More Info

3m ST-ST 10Gb 50/125 OM3 Duplex Multimode PVC Fibre Optic Cable (LSZH) - Aqua

This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic and corrosive gases in poorly ventilated spaces and other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 Gigabit Ethernet applications. More Info

3m Shielded Cat5e Moulded Patch Cable Yellow

Today's mission critical advanced Fast Ethernet and Gigabit computer networks require the stability and reliability of Enhanced Category 5 high-speed cabling to distribute data, voice and video. To protect your high-speed network from noise and electromagnetic interference, use Shielded Enhanced Cat5 Patch Cables from Cables To Go. The moulded boot provides extra strain-relief and durability. Cables To Go Shielded Enhanced Cat5 Patch Cables are available in a variety of colours to easily colour-code your network installation. More Info

SFP+ 10Gbase-CU Passive Twinax Copper Cable, Green, 3M (10-ft.)

Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking.See "Features" tab for... More Info

Cat6, 550 MHz, Snagless Patch Cable, Blue

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.The molded, snagless... More Info

1m Shielded Cat5e Moulded Patch Cable Black

This cable by Delock with EASY-USB type-A male and EASY-USB type Micro-B male can be plugged into the appropriated USB female port in both directions. Thus the male connector can be used both-sided which makes the plug in easier. More Info

Duplex Singlemode 8.3/125 Fiber Patch Cable (LC/LC), 2M

Tripp Lite's 2-Metre, single mode duplex fiber optic LC/LC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex single mode fiber is most commonly used in LAN applications. - Premium PVC 8.3/125 micron singlemode patch cables - Attenuation loss meets or exceeds the latest industry standards - Twice the bandwidth throughput of multimode cable System Requirements - Any fiber optic hardware or NIC card requiring singlemode... More Info