Network Accessories (1857 products)

FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

Information technology professionals rely on HP quality to ensure maximum productivity. As the power of applications, processors, memory adapters and storage devices increases, high-end computer users are seeking ways to optimize their system performance. HP provides leading solutions, adding new levels of performance, availability, flexibility, and management. More Info

Cable RJ45 Cat.6 SSTP angled / angled 2 m

Cables To Go's Cat6 crossover cables are perfect for distributing data, voice, video and connecting network switches and hubs without an uplink port to other switches and hubs. These 550MHz rated patch cables ensure that you always have the necessary throughput to handle bandwidth-intensive applications. Note:These cables are for 10/100 ethernet only and will not work for gigabit ethernet as only two pairs of this cable are crossed.Our new moulded, snag-free "clip" prevents unwanted cable snags during installation and doesn't impair the... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (LC/LC) - Red, 5M

Tripp Lite's Red, 5-meter multimode duplex micron fiber optic LC/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC connectors on each end, a PVC jacket, and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. Ideal for color coding the cable plant.- Manufactured from 62.5/125 duplex (Zipcord) fiber with Red jacket - Length: 5 meter Connectors: LC connector on each end- Insertion loss testing performed on every connector (0.2dB typical)- Red PVC jacket- Fiber made from glass... More Info

15m LC-ST 10Gb 50/125 OM3 Duplex Multimode PVC Fibre Optic Cable (LSZH) - Aqua

This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic and corrosive gases in poorly ventilated spaces and other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 Gigabit Ethernet applications. More Info

5m Cat5E Booted Unshielded (UTP) Low Smoke Zero Halogen (LSZH) Network Patch...

For fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat5e TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs are bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimises Near-End Crosstalk (NEXT) levels with a LSZH outer jacket. The moulded, snagless boot prevents unwanted cable snags during... More Info

Cat6 Snagless CrossOver UTP Patch Cable Blue 1m

Cables To Go's Cat6 crossover cables are perfect for distributing data, voice, video and connecting network switches and hubs without an uplink port to other switches and hubs. These 550MHz rated patch cables ensure that you always have the necessary throughput to handle bandwidth-intensive applications. Note:These cables are for 10/100 ethernet only and will not work for gigabit ethernet as only two pairs of this cable are crossed.Our new moulded, snag-free "clip" prevents unwanted cable snags during installation and doesn't impair the... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (LC/LC), 6M

Tripp Lite's 6-meter multimode duplex micron fiber optic LC/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications where links are 3.05 m (10-ft.) or less.- Manufactured from 62.5/125 duplex (Zipcord) fiber- Length: 6-meters / Connectors: 2 LC connectors on each end- Duplex multimode fiber is most commonly used in LAN applications where links are 10 feet or less- Fiber Optic Distributed Data... More Info

X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable

HP X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable More Info

10GBASE-CU SFP+ Twinax cable, passive, 30AWG cable assembly, 1m - Refurbished

Cisco SFP+ modules offer the following features and benefits.- Industry’s smallest 10G form factor for greatest density per chassis- Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)- Supports “pay-as-you-populate” model for investment protection and ease of technology migration- Digital optical monitoring capability for strong diagnostic capabilities- Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same... More Info

10 ft DB9 RS232 Serial Null Modem Cable F/F

Transfer files via serial connectionThe SCNM9FF 10ft Cross Wired Serial/Null Modem Cable features two DB9 female connectors, allowing you to connect a serial printer to a 9-pin serial port, or transfer files from PC to PC via serial connection.Designed to provide a reliable, long-lasting connection, this serial/null modem cable is backed by StarTech.com''s lifetime warranty.The StarTech.com Advantage- Allows you to extend the reach of your printer or PC to PC connection by 10ft, eliminating cable length restrictions- Replace worn-out or... More Info

HP 0x1x8 G3 KVM Console Switchm, 8 server ports, CAT5, 256 servers(Max)

Knowledge is power with HPE KVM. Looking for a simple and intuitive solution that allows you to access and manage servers in your data center? HPE KVM Analog Console Switches allow you to view and manage up to 256 rackmount servers through a single user interface.KVM Analog Console Switches utilize a local On-Screen Display (OSD) interface, accessed through a rack console such as the HPE LCD8500, that provides intuitive menus for accessing each attached server or serial managed device. HPE KVM Analog Console Switches support an optional USB... More Info

20m LC-ST 10Gb 50/125 OM3 Duplex Multimode PVC Fibre Optic Cable (LSZH) - Aqua

This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic and corrosive gases in poorly ventilated spaces and other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 Gigabit Ethernet applications. More Info

Cat5e 350MHz Snagless Molded UTP Patch Cable (RJ45 M/M) - Black, 7.62 m (25-ft.)

Tripp Lite's 7.62 m (25-ft.) black snagless category 5e (Cat5e) patch cable has 2 snagless RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair stranded UTP and is rated for 350MHz/1Gbps communication. All cables are offered in a variety of lengths and colors for all category 5 (Cat5) and 5e cabling needs. Standard category 5e patch cables are also available. - Premium cabling for Category 5 and 5e applications—rated for 350 MHz/1 Gbps communications - IEEE 802.3ab - PVC 4-pair stranded UTP... More Info

Cable RJ45 Cat.6 SSTP angled / straight 0.5 m

Cables To Go's Cat6 crossover cables are perfect for distributing data, voice, video and connecting network switches and hubs without an uplink port to other switches and hubs. These 550MHz rated patch cables ensure that you always have the necessary throughput to handle bandwidth-intensive applications. Note:These cables are for 10/100 ethernet only and will not work for gigabit ethernet as only two pairs of this cable are crossed.Our new moulded, snag-free "clip" prevents unwanted cable snags during installation and doesn't impair the... More Info

Duplex Multimode 62.5/125 Fiber Patch Cable (LC/LC), 7M

Tripp Lite's 7-meter multimode duplex micron fiber optic LC/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications where links are 3.05 m (10-ft.) or less.- Manufactured from 62.5/125 duplex (Zipcord) fiber- Length: 7-meters / Connectors: 2 LC connectors on each end- Duplex multimode fiber is most commonly used in LAN applications where links are 3.05 m (10-ft.) or less- Fiber Optic... More Info