Network Accessories (1857 products)

Cat5e 350MHz Snagless Molded UTP Patch Cable (RJ45 M/M) - Blue, 6.09 m (20-ft.)

Tripp Lite's 6.09 m (20-ft.) Blue snagless category 5e (Cat5e) patch cable has 2 snagless RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair stranded UTP and is rated for 350MHz/1Gbps communication. All cables are offered in a variety of lengths and colors for all category 5 (Cat5) and 5e cabling needs. Standard, non-snagless category 5e patch cables are also available (N002-Series). - Premium cabling for Category 5 and 5e applications—rated for 350 MHz/1 Gbps communications - IEEE 802.3ab... More Info

Duplex Multimode 50/125 Fiber Patch Cable (LC/SC), 1M

Tripp Lite's 1-Metre multimode duplex Fibre Channel SC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on one end, and LC at the other, a PVC jacket, and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks as well. Also available in 2, 3, 5, 10, 15, 20, 30, and 50 Metre lengths.... More Info

DB-60 to female Winchester Block Type, mode DCE, 3 m

The CAB-V35FC serial cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB-60 connector on the Cisco end and a female Winchester connector on the network end. More Info

2.5m 2x RCA M/FM

This Booted Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements.Each of the... More Info

Cable Mini SAS SFF-8087 > Mini SAS SFF-8087 angled 0.5 m

Perfect for your home office or a large installation project, Enhanced Cat5e 350MHz Snagless Patch Cables from Cables To Go distribute data, voice and video. These cables handle bandwidth intensive applications up to 350MHz and meet all Cat5e TIA/EIA standards. The moulded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350MHz snagless patch cables are available in a variety of colours to easily colour-code your network installation. More Info

StarTech.com 4m Single Mode Duplex Fiber Patch Cable - LC to LC OS1 Single...

Provide a high-performance link between fiber network devicesThe SMFIBLCLC4 4m LC to LC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications.This LC-LC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire – an ideal solution for use in industrial... More Info

Duplex Multimode 50/125 Fiber Patch Cable (LC/SC), 2M

Tripp Lite's 2-Metre multimode duplex Fibre Channel SC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on one end, and LC at the other, a PVC jacket, and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks as well. Also available in 1, 3, 5, 10, 15, 20, 30, and 50 Metre lengths.... More Info

ADSL Cable RJ11/RJ11 Cross-over (B)

The straight-through cable is the default cable and is included in the WIC packaging. For customers that have an external splitter, please order the crossover cable. More Info

10m 2x RCA M/FM

This Booted Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements.Each of the... More Info

SFP+ - SFP+, 10GbE, Active Optical (Optics included) cable, 10 m, Customer...

This Dell™ Networking SFP+ to SFP+, Active Optical Cable provides connectivity up to 10 meter. For use in qualified Dell™ platforms.Dell Networking adds additional functionality to the optics and cables family with the introduction of 10GbE Active Optical Cables and support for additional optics with OS9.10 and OS 6.3. More Info

Cable FC Copper SFP, 2m

These cables are for use inside the cab between the controllers and drive enclosures. More Info

Cat5e Snagless Patch Cable Pink 10m

Perfect for your home office or a large installation project, Enhanced Cat5e 350MHz Snagless Patch Cables from Cables To Go distribute data, voice and video. These cables handle bandwidth intensive applications up to 350MHz and meet all Cat5e TIA/EIA standards. The moulded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350MHz snagless patch cables are available in a variety of colours to easily colour-code your network installation. More Info

StarTech.com 7m Single Mode Duplex Fiber Patch Cable - LC to LC OS1 Single...

Provide a high-performance link between fiber network devicesThe SMFIBLCLC7 7m LC to LC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications.This LC-LC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire – an ideal solution for use in industrial... More Info

Cat6, 5ft, RJ-45, 550MHz, 1Gbps

With Tripp Lite's new category 6 molded patch cables you can stay ahead of the game by using this high-speed cable to distribute data, voice and video. These cables deliver stable performance up to 550MHz. Each comes UL verified meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum. Designed for use in category 6, category 5e and category 5 applications. Cat6 cables are available in a variety of colors with a snagless... More Info

10m ST/ST LSZH Duplex 62.5/125 Multimode Fibre Patch Cable

High speed multimode fibre cables that provide protection from toxic and corrosive gassesLow-Smoke Zero-Halogen (LSZH) Fibre Optic Patch Jumpers from Cables To Go are designed to lessen the emissions of smoke and halogens when the cable is exposed to extreme temperatures. These fibre patch jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet applications. Use to connect fibre optic equipment to fibre optic cross-connects, Cables and information outlets. Each cable is individually 100% optically inspected and tested... More Info