Nexus 7000 18-Slot Chassis 110Gbps/Slot Fabric Module, Spare
The Cisco Nexus ® 7000 Switches provide the foundation of the Cisco ® Unified Fabric. They are a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks with a fabric architecture that scales beyond 15 terabits per second (Tbps). Designed to meet the requirements of the most mission-critical data centers, it delivers continuous system operation and virtualized, pervasive services. The Cisco Nexus 7000 Series is based on a proven operating system, with enhanced features to deliver real-time system... More Info
1100W AC Power Supply, RF
Compatibility: Cisco Catalyst 3850 Series Switches. More Info
Expansion power module for IE-3000-4TC & IE-3000-8TC, 0.65kg
Expansion Power Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E switches. More Info
Catalyst 4500E 9000W AC triple input Power Supply (Data + PoE), Refurbished
The Cisco Catalyst 4500E platform is the most widely deployed modular access platform and has been the industry leader for Power over Ethernet (PoE) technologies. The 9000W power supply offers several benefits:- PoE scale: Unprecedented scale for PoE (802.3af), Power over Ethernet Plus (PoEP) (802.3at), and Universal PoE (UPoE) devices in Cisco Catalyst 4500E Series Switches- Energy efficiency: 80PLUS Platinum (formal certification pending) performance with more than 90-percent efficiencyLower total cost of ownership (TCO):- Lower capital... More Info
ASR1001-X DC Power Supply, Spare
Cisco pays special attention to its network accessories which are the foundation stone of the whole network system. Cisco cables, adapters and other accessories will never let you down and you can always rely on the superior quality and outstanding reliability. Cisco has a wide range of network cables that will fit even the most extraordinary demands. More Info
Catalyst 4500 2800W, RF
All Cisco Catalyst 4500 Series PoE line cards can distinguish an IEEE or Cisco prestandard powered device from an unpowered network interface card (NIC) to help ensure that power is applied only when an appropriate device is connected. With a Cisco PoE network, administrators can depend on a robust network that is safe to deploy and simple to maintain.PoE(P)PoE provides -48-VDC power over standard Category 5 unshielded twisted-pair (UTP) cable up to 100 meters when an IEEE 802.3 af-compliant or Cisco prestandard powered device is attached to... More Info
Catalyst 4500 6000 WAC Power Supply, PoE, RF
Cisco Catalyst 4500 E-Series Dual Input AC PoE Power SuppliesThe 6000W ACV and 4200W ACV power supplies feature combined Mode Power Resiliency as an extension of the traditional combined mode power-supply behavior. Each power supply contains two smaller power supplies (called sub-units). In Combined Mode Power Resiliency the system relies only on power from three out of four power-supply sub-units. When using 200 VAC, this feature helps ensure that maximum power is available while the switch is protected against a single input power failure... More Info
1000BASE-SX+ Mini Gigabit Interface Converter
D-Link’s new line of Gigabit Interface Converters (GBICs) and Small Form-Factor Pluggables (SFPs) transceivers represent an industry leading combination of performance and affordability. D-Link’s new Gigabit transceivers are available in two form-factors: standard (GBIC) or (SFP)/mini-GBIC.The DEM-312GT2 is a high performance 1310nm multimode SFP/(miniGBIC) transceiver. Supporting full duplex, Gigabit speeds on multimode fiber for distances of up to 2km on 62.5µm or 50µm fiber. The unit features a metal housing to reduce EMI and to increase... More Info
Stacking Module f/ AT-MCF2000
The AT-MCF2000 is an end-to-end managed media conversion system. The 1RU chassis can hold either one or two multichannel blades, providing a maximum of 24 independent channels. An optional management module provides control of the chassis, while dual hot swappable power modules ensure maximum system uptime. More Info
AC Hot Swappable Power Supply for PoE models AT-x610
Additional 250W AC system power supply More Info
SNMP Managment Module f/ AT-MCF2000
The AT-MCF2000 is an end-to-end managed media conversion system. The 1RU chassis can hold either one or two multichannel blades, providing a maximum of 24 independent channels. An optional management module provides control of the chassis, while dual hot swappable power modules ensure maximum system uptime.The AT-MCF2000M is the management module for the AT-MCF2000 two-slot chassis. With the AT-MCF2000M management module, if there is a blade failure, insertion or removal, your traffic flow will not be interupted. More Info