Racks & Cabinets (1106 products)

4 Compartment 42u Co-Location Server Cabinet for Data Centres - Each Secure...

CCS CoLocation Server Racks provide a perfect solution for your Data Centre Rack & Cabinet requirements. Each compartment is securely segregated and uniquely keyed for increased security, with cable entry top and bottom. The racks are load rated to 1000kg (evenly distributed) Easy baying is possible with an optional baying kit, allowing these Co-Location Server Racks to be installed in high density Data Centre Environments. Details: Features: Welded frame construction with 1000kgs weight loading 2 x lockable solid steel side panels 2 x... More Info

19" Cable Dump Panels, available in 1u and 2u sizes

Cable Dump Panels provide Ideal cable management keeping network cables tidy whilst allowing them to be fed through to the back of the network cabinet. More Info

Set of 4 Jacking/Levelling Feet

Cabinet Jacking?levelling feet are ideal to sit your cabinet on and perfect if the floor you are using your Cabinet on is uneven. Supplied in a set of 4 More Info

42U S2 standard rack

IBM 42U Rack offerings are industry-standard 19-inch server cabinets that are designed for high availability IBM System x and BladeCenter environments. They are optimized to help maximize floor space, expedite installation, simplify cable management, and increase accessibility for improved serviceability. More Info

NetShelter SV 42U 800mm Wide Perforated Split Rear Doors

Rack components that can be added to existing racks if requirements change. More Info

Rack PDU Accessories, 1kg, black

Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions More Info

NetCommander 8-Port Cat5 Rack-Mount Console KVM Switch w/19-in. LCD

Tripp Lite’s B070-008-19 KVM Switch gives you a rack-mountable full keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. Easy to install and use, it’s the optimal solution for controlling up to 8 computers/servers.The B070-008-19 uses inexpensive, user-supplied Cat5e/6/6a and a Server Interface Unit so you can control computers/servers located up to 30.5 m away from the switch. You can switch easily between the 8 ports using an on-screen display (OSD) or keyboard hot key commands. Multi-level password... More Info

Houses the core home networking equipment, available with or without PDU

Connectix Home Cabinets have been designed to be the heart of a state of the art home, or small office, networking system. Available in 8u and 10u sizes, the cabinets can house all core equipment and wiring terminations. These key lockable cabinets are ideal for installing Connectix 12 way RJ45 panels, and for distributing voice, data, ISDN, internet connection, TV, video and CCTV around a home or small office network. The cabinet has two enclosed sections; one to house a 4-way power unit, and another for leads and incoming cables.... More Info

Rack PDU 2G, Switched Plus, ZeroU, 32A, 230V, (21) C13 & (3) C19

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering... More Info

Rack PDU 2G, Metered, ZeroU, 11kW, 230V, (36) C13 & (6) C19

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC... More Info

Fan unit for use in CCS Data Cabinets - available with 2 or 4 fans

High speed fan units to expel hot air from the top of the CCS Data Cabinet Range. These units are fitted internally to the upper aperture of the cabinet meaning is won't increase the overal height of the cabinet. Available with options for 2 or 4 fans. More Info

Rack PDU 2G, Switched, ZeroU, 20A/208V, 16A/230V, (7) C13 & (1) C19

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize... More Info

Rack PDU 2G, Switched, ZeroU, 16A, 230V, (7) C13 & (1) C19, IEC309 Cord

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize... More Info

Cable kit A2UCBLSSD

Cable kit with two cables to enable fixed SSD and rear drive simultaneously in R2000WT family of products.Included Items- (1) power cable to provide power to rear HDDs and fixed SSDs (1) fan out data cable Mini-SASHD to four 7-pin. More Info

Nexus 2224TP, 2248TP, and 2248TP-E FEX Fan Module (Std airflow, port side...

The Cisco Nexus 2000 Series design aligns with that of servers. It offers front-to-back cooling, compatible with data center hot-aisle and cold-aisle designs, all switch ports at the rear of the unit in close proximity to server ports, and all user-serviceable components accessible from the front panel. It also offers back-to-front cooling, with switch ports in front of the chassis, aligned with the cold aisle, for optimized cabling in network racks. The Cisco Nexus 2000 Series is built for nonstop operation, with redundant hot-swappable... More Info