Racks & Cabinets (1065 products)

More Info

ePDU G3 Metered Input, 7kW, 230V In, 1 x 60309 32A In, 12 x C13 & 4 x C19 Out

New ePDU G3 Metered Input models feature best-in-class technologies, including ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter and the ability to daisy chain four ePDUs to share the same network connection and IP address. More Info

NetShelter SX 42U 750mm Wide x 1200mm Deep Networking Enclosure with Sides

Integrated high density cable managementDecrease installation time while supporting the cabling needs of large networking switches.Cable protection and pass-throughSmooth plastic fingers provide proper bend radius.Optimized enclosure design for side-to-side airflowAirflow management panels, left vertical mounting rail, and side airflow duct kit ensure proper side-to-side airflow to the networking switches from the cold aisle and provide isolation of hot air preventing it from re-entering the cold aisle. Additionally, the front left vertical... More Info

StarTech.com 1U 19in Steel Vertical Wall Mount Equipment Rack Bracket

The RK119WALLV 1U 19in Steel Vertical Wall Mount Equipment Rack Bracket offers a versatile storage solution allowing rackmount equipment (Network devices, power strips, patch panels) to be mounted vertically (flush with wall) to save space. Alternatively, the 1U bracket can be installed horizontally under a desk, making it easy to access installed equipment directly from your workspace. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.Perfect for... More Info

Rack Cable Management Kit

WEEE Green Compliant More Info

NetShelter SX 42U 1200mm Deep Split Side Panels Qty. (2)

Features- Half-height side panels.- Powder coat paint finish.- Protective grounding provisions.- Tool-less mounting. More Info

25U S2 standard rack

- Provides 25 U of rack space - Contains two single side-wall compartments - Can be shipped with configured servers - Helps reduce configuration and support costs for clustering and small business applications. More Info

2/4-Post Static Rack Rails Kit

The ReadyRails™ static rail kit for 2U Systems, including PowerEdge R720 provides tool-less support for 4-post racks with square or unthreaded round mounting holes including all generations of Dell racks. It also supports tooled mounting in 4-post threaded racks and 2-post (Telco) racks for added versatility. The static rails support a wider variety of racks than the sliding rails but do not support serviceability in the rack and are thus not compatible with the CMA. This product has been tested and validated on Dell systems. It is supported... More Info

579 x 122 x 71 mm, 1.82 kg

The solid Partition allows overhead routing of networking cables on top of the NetShelter enclosures and 4-post racks. Two partitions attach without tools to the roof in a variety of depths. The solid partition is designed to be mounted in the front for a clean look. Each partition ships with ground studs and one 8 inch/203mm grounding strap.Includes: Installation guide, Qty 1 - 8 inch/20cm grounding strapProtective grounding provisionsSafety protection against electric shock and reduction of EMI emissions. NetShelter Enclosures incorporate... More Info

NetDirector 16-Port 1U Rack-Mount Console KVM Switch w/17-in. LCD

Tripp Lite’s B020-016-17 KVM Switch gives you a rack-mountable keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. Easy to install and use, it’s the optimal solution for controlling up to 16 computers/servers. Increase the number of connected computers to up to264 by daisy-chaining up to 31 B022-U08 KVM switchesThe B020-016-17 has a built-in 17” LCD screen that supports video resolutions up to 1280 x 1024. You can switch easily between the 16 ports using on-console push buttons, an on-screen display (OSD) or... More Info

NetShelter SX 48U Duct Kit for Cisco Nexus 7018

Air distribution for power dense racks and low pressure areasIncludes:Baying hardware, Foam gasket strips, Installation guide, Mounting Hardware, Side airflow ducts, Side baffles More Info

Smart-UPS SRT 19" Rail Kit for Smart-UPS SRT 5/6/8/10kVA

The iBusway for Data Center solution uses bolted snap-fit hangers and plug-in joint connections, which simplify installation and eliminate the need for expensive special tools. More Info

DPI 30amp/250V Front-end PDU w/ NEMA L6-30P

This 30amp high-voltage (200-220V) front-end power distribution unit (PDU) option can serve as a line-cord consolidator, accepting multiple feeds from the universal rack PDUs and delivering them from the rack as a single line cord. It is unique because it More Info

Cable Ladder Clamp Kit

Racks and enclosures house more equipment today than ever before. This rise in equipment densities has increased the need for an organized cable management system both inside and outside the rack. Poor cable management can not only lead to damaged cables or increased time to add or change out cables, but can block critical airflow or access. This can lead to inefficiencies in the performance of your equipment or even downtime. These accessories offer the proper cable management options to meet varying needs. Solutions range from simple cable... More Info

3.2-3.8kW Single-Phase Monitored PDU, 200-240V Outlets (8-C13), C20/L6-20P...

Tripp Lite single phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage,frequency and load levels via built-in network connection. PowerAlert interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or... More Info