Interface Cards & Adapters (144 products)

Modbus Card

The Eaton Modbus Card is an X-slot UPS connectivity device that provides continuous, reliable and accurate remote monitoring of a UPS system through a Building Management System (BMS) or Industrial Automation System (IAS).The card provides the means to integrate data from the UPS into the user-provided management system using Modicon‚ Modbus RTU Protocol. Key power quality and UPS status information may be monitored in real-time to aid in the management of the UPS and notification of potential power problems.- Includes Modbus Profiler... More Info

VWIC3-2MFT-G703 - 1.544 Mbps ± 50 bps/32 ppm/2.048 Mbps ± 100 bps/50 ppm, T1,...

IntroductionThe Cisco® Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC3s) support data and voice applications on the Cisco 1921, 1941 and 1941W (data only), and the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E Integrated Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in... More Info

StarTech.com 2 port PCI Express SuperSpeed USB 3.0 Card with UASP Support - 1...

Add one internal and one external SuperSpeed USB 3.0 to your PCThe PEXUSB3S11 PCI Express USB 3.0 Card lets you add one internal, and one external USB 3.0 port to your PC through a PCI Express slot.Featuring a native NEC PCI Express host controller chipset, the new USB 3.0 standard supports transfer rates of up to 5Gbps, while still providing backward compatibility with older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices. The inclusion of an internal USB 3.0 connection provides the added benefit of compatibility with USB 3.0-based internal... More Info

PCIe, 2 x M.2, NVMe, PCIe Gen2 x4

QM2 series PCIe cards add support for M.2 SSDs to a QNAP NAS, allowing users to configure SSD caching, a caching pool, or an auto-tiering volume to improve overall NAS performance.- M.2 SSDs* can be installed to form caching pools or an auto-tiering volume- Enables SSD caching to boost performance and optimizes storage efficiency with Qtier Technology**- M.2 SSD thermal sensors allow real-time M.2 SSD temperature monitoring- A quiet cooling module (heatsink and smart fan) minimizes overheating risks and sustains constant high performance-... More Info

USB 3.1 Gen 1 USB-C to Gigabit Ethernet NIC Network Adapter with USB-C (USB...

The U436-06N-G-C USB 3.1 Gen 1 USB-C to Gigabit Ethernet NIC Network Adapter allows USB Type-C computers, laptops, tablets and other compatible devices without an NIC (Network Interface Controller) to connect to a network or the Internet using an RJ45 cable. It’s a more convenient and less expensive way to connect to a network than opening your device and installing an internal Ethernet card. No software or drivers are needed. Connect the adapter’s USB-C male plug to the USB-C port on your device. Then, connect the adapter’s RJ45 port to a... More Info

4 Port 12G SAS Bridge Board (RAID 0/1/10) AHWBP12GBGB

4-port SAS Bridge Board with RAID Levels 0, 1, 10 support More Info

PCIe, Gen2 x 4, 4 x M.2

QM2 series PCIe cards add support for M.2 SSDs to a QNAP NAS, allowing users to configure SSD caching, a caching pool, or an auto-tiering volume to improve overall NAS performance.- M.2 SSDs* can be installed to form caching pools or an auto-tiering volume- Enables SSD caching to boost performance and optimizes storage efficiency with Qtier Technology**- M.2 SSD thermal sensors allow real-time M.2 SSD temperature monitoring- A quiet cooling module (heatsink and smart fan) minimizes overheating risks and sustains constant high performance-... More Info

HWIC-4SHDSL-E= - 1x RJ45, 5.6 Mbps, G.SHDSL, Green

Cisco G.SHDSL High Speed WAN interface Card with IEEE 802.3ah EFM Support for Cisco Integrated Services RoutersCisco® Integrated Services Routers (ISRs) and Integrated Services Routers Generation 2 (ISR G2) offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco single port 4-pair G.SHDSL High Speed WAN Interface Card (HWIC-4SHDSL-E) offers G.SHDSL-based WAN connectivity using the 802.3ah Ethernet in the First Mile (EFM)-compliant extended rate symmetric high-bit-rate DSL... More Info

Intel Passthrough Bridge Board AHWBPBGB24

6-port SAS Bridge Board with no RAID support More Info

4 Port Native PCI Express RS232 Serial Adapter Card with 16550 UART

Add 4 RS-232 serial ports to your standard or small form factor computer through a PCI Express expansion slotThe PEX4S553 4-Port Native PCI Express RS232 Serial Adapter Card with 16550 UART lets you add 4 RS232 (DB9) serial ports, using a single PCI Express expansion slot.Based on a native single-chip design, this 4-port serial adapter card allows you to harness the full capability offered by PCI Express (PCIe), while reducing the load applied to the CPU by as much as 48% over conventional bridge-chip serial cards.The RS232 Serial Adapter... More Info

HWIC-1DSU-T1=, 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card

Serial interfaces can be used to provide WAN access for remote sites. With support for serial speeds up to 8 Mbps per port, the 2-port serial HWIC is ideal for low- and medium-density WAN aggregation.The HWIC-1DSU-T1 also offers an integrated CSU/DSU, simplifying configuration and management. Integration allows management of the router and CSU/DSU as a single SNMP entity while also providing detailed troubleshooting capabilities. Troubleshooting features include self-test, loopbacks, CSU/DSU reset, alarm counters, and T1 statistics. More Info

Bestdock Relay Interface Card UPS Connectivity Device

Communications and control software are at the heart of any reliable power quality solution.Eaton Relay Interface Cards enable automatic shutdown and network monitoring of UPS system status through a connected computer.The BestDock Relay Interface Card is a dedicated adapter that provides the essential dry-contact interface between your Eaton UPS and any relay-connected computer, including the AS/400, as well as a variety of industrial applications. This card is compatible with Eaton UPSs that have BestDock slots. More Info

X-Slot Relay Interface Card UPS Connectivity Device

Communications and control software are at the heart of any reliable power quality solution.Eaton Relay Interface Cards enable automatic shutdown and network monitoring of UPS system status through a connected computer.The X-Slot Relay Interface Card is a dedicated adapter that provides the essential dry-contact interface between your Eaton UPS and any relay-connected computer, including the AS/400, as well as a variety of industrial applications. This card is compatible with Eaton UPSs that have X-Slots. More Info

1U Fabric Upgrade Kit (with Cable) AHWBPFABKIT

Dual Port Fabric Upgrade Kit for dual CPU install (with 4 IFT Cables and 1 sideband cable) More Info

StarTech.com PCI Express to Mini PCI Express Card Adapter

Convert a Mini PCI Express Card into a Standard Desktop PCI Express CardThe PEX2MPEX PCI Express to Mini PCI Express Adapter Card enables Mini PCI Express cards (Mini Cards) to be used in a standard PCI Express card slot. These PCIe Mini Cards, which are typically designed for laptops or small form factor ITX computers, can be used normally inside more conventional desktop computers.The adapter card features a complete PCIe to Mini PCIe pass-through design that eliminates data transfer rate bottlenecks, while the included full and low... More Info