List of products by manufacturer Tripp-Lite
SmartRack 2U Horizontal Cable Manager - Flexible ring type
Tripp Lite's SmartRack SRCABLERING2U fits any standard 19" rack and helps eliminate cable stress for your rack enclosure cabinet. The 2U 19-inch horizontal cable manager (flexible ring type) organizes cables within the SmartRack enclosure or open rack. Required mounting hardware is included.● Tripp Lite's SmartRack SRCABLERING2U fits any standard 19" rack and helps eliminate cable stress for your rack enclosure cabinet● 2U 19-inch horizontal cable manager (flexible ring type) organizes cables within the SmartRack enclosure or open rack●... More Info
SmartRack 5U Low-Profile Wall-Mount Rack Enclosure Cabinet - 20 in. max...
The SRWF5U SmartRack 5U Low-Profile Vertical-Mount Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 68 kgs.Because the low-profile cabinet mounts vertically, it extends less than 10 inches... More Info
SmartRack 6-ft. (1.8 m) Vertical Cable Manager - Flexible ring type &...
Tripp Lite's SmartRack SRCABLERINGVRT helps eliminate cable stress by organizing the cables within the SmartRack enclosure or open rack cabinet. The vertical cable manager (flexible ring type) is 1.83 m (6-ft.) high and split into two 0.91 m (3-ft.) sections to allow for multiple installation options. SRCABLERINGVRT offers toolless button mounting. ● Tripp Lite's SmartRack SRCABLERINGVRT helps eliminate cable stress by organizing the cables within the SmartRack enclosure or open rack cabinet ● The vertical cable manager (flexible ring type)... More Info
SmartRack 6U Wall-Mount Standard-Depth Rack Enclosure Cabinet, Black
The SRW6U SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 90 kgs (200 lbs)The side panels and front door lock securely to help prevent damage, tampering or theft. The... More Info
SmartRack 8U, 12U or 22U Expandable Wall-Mount Open Frame Rack
The SRWO8U22 SmartRack 8U/12U/22U Expandable Flat-Pack Low-Profile Switch-Depth Wall-Mount 2-Post Open-Frame Rack stores and organizes EIA-standard 19-inch rack equipment compatible with 2-post mounting in network wiring closets, back offices and other secure IT areas with limited floor space where a locked enclosure is not required. Mounted to the wall or resting on the floor, this rack offers fast, easy access to network components and cabling. Constructed from heavy-duty steel with a durable black powder-coated finish, the rack has a... More Info
SmartRack Anti-Tip Stabilizing Plate Kit - Provides extra stability for...
Tripp Lite's SmartRack SRSTABILIZE is an anti-tip stabilizer plate for 25, 42, 45 and 48U rack enclosure cabinets. This anti-tip stabilizing plate kit provides extra stability for standalone enclosures. The front stabilizer brace is flush with the floor and helps prevent the rack from tipping. SRSTABILIZE can be secured to the floor with user-supplied bolts.● SRSTABILIZE is an anti-tip stabilizer plate for 25, 42, 45 and 48U rack enclosure cabinets● Provides extra stability for standalone enclosures● The front stabilizer brace is flush with... More Info
Bolt-Down Kit - Silver
Tripp Lite's SmartRack SRBOLTDOWN provides extreme stabilization and security for cabinets and racks. The bolt-down kit enables SmartRack to be secured to a concrete floor. SRBOLTDOWN includes four concrete inserts, four bolts and four fender washers.Technical Notes:We recommend using a 1/2" concrete drill. Hole must be 4.5" to 4.75" deep. Mark the hole, drill the hole, then tap the anchor into the hole. Thread the bolt into the anchor a few threads only. Tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole,... More Info
SmartRack Copper Bus Grounding Bar
The SRGROUND is a full length (42U) bus grounding bar made from heavy-gauge solid copper that attaches to Rack Enclosure Cabinets or Open Frame Racks to provide convenient ground contact for standard rackmount equipment. Every other U space has a drilled and tapped hole to allow a ground wire "jumper" to be installed. The jumper then bridges to the individual pieces of equipment, with grounding straps, allowing a direct path to ground rather than going through surrounding equipment. The SRGROUND can mount in a Tripp Lite enclosure in two... More Info
SmartRack Door Handles with Combination Lock - 2-pack for front and rear...
This replacement combo handle allows facility managers to closely guard access to specific cabinets. Combos can be easily changed when access requirements change but retains a key override for management.● This replacement combo handle allows facility managers to closely guard access to specific cabinets● Combos can be easily changed when access requirements change but retains a key override for management● Two piece replacement combo locks for SmartRack Enclosures● Three digit combo● Key overridePackage Includes● 2pc combo handles ● all... More Info
SmartRack Enclosure Skirt Kit
Tripp Lite's SmartRack SRSKIRT is a brush strip that blocks unwanted airflow under rack enclosure cabinets. The SRSKIRT improves cooling efficiency by segregating cold aisle from hot aisle.● Brush strip blocks unwanted airflow under rack enclosure cabinets● Improves cooling efficiency by segregating cold aisle from hot aisle● Brush strip blocks unwanted airflow under rack enclosure● Improves cooling efficiency● Segregates cold aisle from hot aislePackage Includes● 1 Piece of SRSKIRT ● Mounting Hardware ● Installation instructions More Info
SmartRack Hardware Kit - Connects SRCABLELADDER to a wall or Open Frame Rack
Tripp Lite's SmartRack SRLADDERATTACH allows an overhead cable ladder (SRCABLELADDER) to be attached to our 2 post rack (SR2POST), 4 post rack (SR4POST) and terminate on the wall. SRLADDERATTACH includes all hardware needed to create two connections (the ladder to one rack and the wall or from one rack to another). When connecting to the 2 post or 4 post racks they can be attached either parallel with the rack structure or perpendicular to the rack structure.- Allows an overhead cable ladder (SRCABLELADDER) to be attached to our 2 post rack... More Info
SmartRack Heavy-Duty Fixed Shelf (250 lb/113 kg capacity; 26 in/660 mm depth)
Tripp Lite's SmartRack SRSHELF4PHD accommodates tower units, monitors and other equipment. The fixed heavy-duty shelf offers 25.5 inches of shelf depth and supports up to 113 kgs (250 lbs) SRSHELF4PHD is designed for 4 post rack mounting. Required mounting hardware is included. ● Accommodates tower units, monitors and other equipment ● Fixed heavy-duty shelf offers 25.5 inches of shelf depth and supports up to 113 kgs (250 lbs) ● Designed for 4 post rack mounting ● Required mounting hardware is included More Info
SmartRack Heavy-Duty Sliding Shelf (200 lb/91 kg capacity; 26 in/660 mm depth.)
Tripp Lite's SmartRack SRSHELF4PSLHD is a heavy duty sliding shelf for installation in rack cabinets. The SRSHELF4PSLHD has a 28.3 in. / 72 cm depth (29.5 in. / 74.9cm including handle) and can support up to 90 kgs (200 lbs) This fully extendible shelf can accommodate tower units, monitors and other equipment. It is designed for 4 post rack mounting and the required mounting hardware is included. Expandable mounting rails supports installation in racks with front to rear rail distances between 28 in. / 71cm minimum and 46 in. / 117cm... More Info
SmartRack Keyboard Shelf (25 lb/11 kg capacity; 40.64 cm (16 ") / 406 mm depth)
Tripp Lite's SmartRack SRSHELF4PKYBD is a sliding keyboard shelf designed for all standard 17 inch keyboards. The SRSHELF4PKYBD is an extendible shelf to allow quick access to the keyboard or for storage when not in use. It is designed for 4 post rack mounting and has a 11 kg (25lb) weight capacity. Required mounting hardware is included. ● Sliding keyboard shelf designed for all standard 17 inch keyboards. ● Extendable shelf to allow quick access to the keyboard or for storage when not in use ● Designed for 4 post rack mounting ● 11 kg... More Info
SmartRack Magnetic Door Switch Kit for front and rear doors; requires...
The SRSWITCH is designed to monitor rackmount enclosure door access and notify users when a door has been opened. The SRSWITCH must be used together with the following Tripp Lite accessories: SNMPWEBCARD and ENVIROSENSE, with TLNETCARD and TLNETEM, or with WEBCARDLX and E2MTHDI, E2MTDI (all available separately.)● Designed to monitor rackmount enclosure door access and notify users when a door has been opened● Must be used together with the following Tripp Lite accessories: SNMPWEBCARD and ENVIROSENSE, with TLNETCARD and TLNETEM, or with... More Info